Basic Kit and panel set Unihog

Based on the Mercedes 1948 Unimog®, this rugged model easily accommodates adults and older kids.

Choose our basic kit along with pre-cut body panels for an easier build project. Alongside the basic kit, you’ll receive CNC pre-cut moisture-resistant MDF body panels, reducing the construction time of your Toylander Unihog to around 65 hours . Please see below to supplement your kit or upgrade your parts. 

Kit and panel set includes manual, steel fabrication set, chunky tyres, drive kit (twin motor and battery), speed control kit, bodywork, additional components (lights, electric horn, wheel caps, dash and dashboard stickers), softwood batten, glue, screws, conduit and CNC cut moisture resistant MDF panel set.

Example panel set is shown. You are purchasing the Unimog panel set which will differ from the image.


Full kit contains

Fabricated Parts: Steel

  • Front Axle + Pivot Support Angles
  • Steering and stub axles
  • Steering column
  • Rear axle
  • Brake assembly complete with brake materials *Right or Left hand drive Please state if LHD required
  • Front bumper
  • Rear bumper
  • Above items include all Nyloc nuts, Washers, Bolts, Screws, Brass washers, 1” washers, Spring, Split pins etc.


  • Set of 4 Road wheels with chunky tread tyres
  • Conversion to two wheels for drive sprocket extension and bearing


  • 2 Electric motors and gearboxes
  • 2 Motor Mounting Plates and bolt sets
  • 2 Motor drive sprockets
  • 2 Chain and link sets
  • Steering wheel Steel, three spoke Black finish


  • Speed control:12/24v including ignition key, fwd/rev switch & motor wiring. Gives genuine throttle feel and variable response.
  • Aluminium chequerplate throttle box complete ready assembled.
  • Safety Isolator switch with red removable key
  • Motor protection fuse box and spare fuse


  • Spare wheel moulding
  • Hub caps, plastic moulded set of 4 red caps, glue on
  • Windscreen Kit (You assemble)
  • Chain guard (2 Piece)
  • Fuel tank/water tank cap x 2
  • Ancillary parts pk: Rr bumper ends, seat hinges, Bonnet lock, seat stops, 2 moulded door hinges, 2 moulded side vents


  • Lighting set: H/lamps x 2, tail light x 2, switches, wire, con blocks, crimps All LED lamps, headlight support nuts&bolts
  • Lighting and horn fuse box
  • Electric horn kit
  • Dash board aluminium plate with hole cut for key switch & F/R switch
  • Instrument sticker
  • Wheel retaining caps. Do not fit until job complete.( Use jubilee clips as temporary fixing).


  • 2 x GEL battery 33amp Hr 12v (safe non spill)
  • Safe battery mounting set, strap and bolts for 1 or 2 batteries
Write Your Own Review
You're reviewing:Basic Kit and panel set Unihog
Your Rating

Get inspired

Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover