Basic Kit and ready made body MB43 Willys Jeep

Toylander based on the MB43 Willys Army Jeep®

Choose the basic kit along with pre-made body for the easiest build option. Alongside the basic kit, you’ll receive the CNC pre-made moisture-resistant MDF body, reducing the construction time of your MB43 Willys Jeep to around 40 hours.

Please see below to supplement your kit or upgrade your parts.

Spare wheel and Jerry can are not included in basic kit. These can be added as an extra option. Please see below.

The kit and ready made body includes manual, steel fabrication set, chunky tyres, drive kit (single motor and battery), speed control kit, bodywork and additional components (lights, electric horn, wheel caps, body stickers dash and dashboard stickers) and a fully assembled unpainted body tub made of CNC cut moisture resistand MDF. Please note spare wheel and jerry fuel can not included in basic kit, see parts and extras.

In stock
Rating:
100% of 100
£2,234.09
SKU
BDYKIT-MB43
Optional upgrades and time saving extras.

Full kit contains

Fabricated Parts: Steel

  • Front swing / pivot axle and support brackets
  • Steering stub axles and steering bars
  • Steering column MB43
  • Rear axle and plates
  • Brake assembly LHD
  • Front bumper MB43
  • Above items include all nuts, bolts, washers, screws etc to fix and mount all the parts.

Wheels

  • Road set wheels Town and Country tyres [4 off]
  • Conversion to one wheel for drive sprocket extension and bearing
  • Steering wheel

Drive

  • 1 x Electric motor and gearbox
  • Motor Mounting Plate and bolt set
  • Motor drive sprocket
  • Chain and link

Control

  • Speed control:12/24v including ignition key, fwd/rev switch & motor wiring. Gives genuine throttle feel and variable response.
  • Aluminium chequerplate throttle box complete ready assembled.
  • Motor protection fuse box and spare fuse
  • Safety Isolator switch with red removable key

Bodywork

  • Pre rolled Bonnet, fit your ribs, prepare and paint
  • Bodyside supports NEW flat
  • Wing top reinforcement plates
  • Windscreen assembly kit (you assemble)
  • Chain guard (2 piece)
  • Ancillary Pack: Side handles, Bonnet Child lock, Bonnet catches, Bumper end caps, Hinges for seat

Components

  • Lighting set: Headlamps, Large Tail lights [make your own mask] switches, wire, con blocks, crimps,
  • Lighting and horn fuse box
  • Electric horn kit
  • Dash board flat plate Aluminium
  • Instrument dials sticker ready cut
  • Wheel retaining caps. Do not fit until job complete.( Use jubilee clips as temporary fixing).
  • Bridge plate sticker yellow + Number 2 [Stickers only]
  • Star set 1 Large + 2 small

Battery

  • 1 x GEL battery 33amp Hr 12v (safe non spill)
  • Safe battery mounting, strap and bolt set for 1 or 2 batteries
Write Your Own Review
You're reviewing:Basic Kit and ready made body MB43 Willys Jeep
Your Rating

Get inspired

Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover