Basic Kit Toylander 1

Toylander 1 Basic Kit based on the 1948 Series 1 Land Rover®

Choose our basic kit option and you’ve got everything you need to construct your own Toylander 1 (excluding wood and paint). Please see below for Time Saving Extras and Optional Upgrades.

Please note basic kit does not include spare wheel and Town & Country tyres, to add these options see below.

This straightforward single motor build project should take around 80 hours. You can add time saving upgrades such as Ready Made Body or Pre Cut Panel Set.

Please indicate in comments box if you require right or left hand drive. Basic kit now includes circuit board and plug and play switches, lights and horn wiring.

Basic kit includes manual, steel fabrication set, standard tyres, drive kit (single motor and battery), speed control kit, bodywork and additional components (circuit board, lights, electric horn, wheel caps, dash and dashboard stickers)

In stock
100% of 100
Optional upgrades and time saving extras.

Full kit contains

Fabricated Parts: Steel

  • Front pivot axle with support brackets
  • Steering and stub axles
  • Steering column
  • Rear axle
  • Brake assembly complete with brake materials Right or Left hand drive *Please state if LHD required
  • Front bumper
  • Above items include all Nyloc nuts, Washers, Bolts, Screws, Brass washers, 1” washers, Spring, Split pins etc.


  • Road set wheels std tyres
  • Conversion to one wheel for drive sprocket extension and bearing


  • 1 x Electric motor and gearbox
  • Motor Mounting Plate and bolt set
  • Motor drive sprocket
  • Chain and link
  • Steering wheel Steel, three spoke Black finish


  • Speed control:12/24v including ignition key, fwd/rev switch & motor wiring. Gives genuine throttle feel and variable response.
  • Aluminium chequerplate throttle box complete ready assembled.
  • Safety Isolator switch with red removable key
  • Motor protection fuse box and spare fuse


  • Pre rolled bonnet correct shape and size. (You fit ribs, prepare and paint)
  • Front wing caps pre-bent
  • Windscreen Kit (You assemble & complete)
  • Chain guard (2 Piece)
  • Radiator grille (You cut to size and shape)
  • Ancillary parts pk: Rr bumpers, hinges Bonnet lock tailgate furniture seat stops, bonnet catches


  • Lighting set: LED Headlamps, tail lights, switches, wire, con blocks, crimps
  • Lighting and horn fuse box
  • Electric horn kit
  • Dash board moulded for centre
  • Instrument stickers
  • Wheel retaining caps. Do not fit until job complete.( Use jubilee clips as temporary fixing).


  • 1 x GEL battery 33amp Hr 12v (safe non spill)
  • Safe battery mounting set, strap and bolts for single or twin Batteries
Write Your Own Review
You're reviewing:Basic Kit Toylander 1
Your Rating

Get inspired

Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover
Children's Land Rover