Basic Kit and ready made body Toylander 2

Toylander 2 based on the 1958 Series 2 Land Rover®

Choose the basic kit along with pre-made body for the easiest build option. Alongside the basic kit, you’ll receive the ready assembled moisture-resistant MDF body (unpainted), reducing the construction time of your Toylander 2 to around 40 hours. Please see below to supplement your kit or upgrade your parts. Please note basic kit does not include spare wheel or Town & Country tyres, see below to add these options.

The kit and ready made body includes manual, steel fabrication set, standard tyres, drive kit (single motor and battery), speed control kit, bodywork and additional components (lights, electric horn, wheel caps, dash and dashboard stickers) and a fully assembled unpainted body tub made of CNC cut moisture resistand MDF.

We found other products you might like!

Full kit contains

Fabricated Parts: Steel

  • Front Pivot Axle with support brackets
  • Steering and stub axles Right or Left hand drive Please state if LHD required
  • Steering column
  • Rear axle
  • Brake assembly complete with brake materials Right or Left hand drive *Please state if LHD required
  • Front bumper
  • Above items include all nuts, bolts, washers, screws etc to fix and mount all the parts.


  • Set of 4 Road wheels with standard tyres
  • Conversion to one wheel for drive sprocket extension and bearing


  • 1 x Electric motor and gearbox
  • Motor Mounting Plate and bolt set
  • Motor drive sprocket
  • Chain and link
  • Steering wheel Steel, three spoke Black finish


  • Speed control:12/24v including ignition key, fwd/rev switch & motor wiring. Gives genuine throttle feel and variable response.
  • Aluminium chequerplate throttle box complete ready assembled.
  • Safety Isolator switch with red removable key
  • Motor protection fuse box and spare fuse


  • Pre rolled bonnet shell (you prepare ribs, fit them and paint)
  • Front wing caps pre-bent
  • Windscreen Kit (You assemble)
  • Chain guard (2 Piece)
  • Radiator grille (You cut and shape as required)
  • Ancillary parts pk: Rr bumpers, hinges Bonnet lock tailgate furniture seat stops, bonnet catches


  • Lighting set: 2 Headlamps x 2, tail light x 2, Flashing amber lamps x 4 switches, wire, con blocks, crimps All LED lamps
  • Lighting and horn fuse box
  • Electric horn kit
  • Dash board moulded for centre
  • Instrument sticker
  • Wheel retaining caps. Do not fit until job complete.( Use jubilee clips as temporary fixing).


  • 1 x GEL battery 33amp Hr 12v (safe non spill)
  • Safe battery mounting set, strap and bolts for 1 or 2 batteries
Write Your Own Review
You're reviewing:Basic Kit and ready made body Toylander 2
Your Rating